Купить Адаптер - Тип запчасти

MPI-адаптер для подключения интерфейса для программирования устройсва управления SIMATIC® S7-300 / 400 Phoenix Contact PSI-MPI/RS232-PC

Каталожный номер: 2313148

Адаптер Bluetooth-USB с непосредственным подключением к портам USB Phoenix Contact PSI-WL-PLUG-USB/BT

Каталожный номер: 2313083

тип A, для беспроводной передачи данных от USB-интерфейса.
Минимальный заказ: 1 шт.
Упаковка: 1 шт.

Адаптер Phoenix Contact RAD-ADP-N/F-N/F

Каталожный номер: 2867843

N (гнездовой) -> N (гнездовой) вносимое затухание < 0,3 dB при 2,4 ГГц.
Минимальный заказ: 1 шт.
Упаковка: 1 шт.

Адаптер WirelessHART Adapter WHA-ADP2-F8B2-0-A0-Z1-Ex1 Pepperl+Fuchs

Каталожный номер: 261308

Supply
Rated voltage		7.2 V DC , battery operated
Electrical specifications
Output rated operating current		4 ... 20 mA
Supply		loop power for field devices voltage 8 ... 23 V DC, adjustable in steps of 0.1 V
Input
Suitable field devices		usable for: - one point-to-point connection with a HART field device, or - one point-to-point connection with a 4 ... 20 mA field device, or - up to four externally powered HART field devices operating in multidrop mode
Connection		terminals 1, 2, 3, 4, 5, 6 multiple wirings available , depending on operating mode
Current		4 ... 20 mA
HART communication
	Protocol	HART 7.3, backward compatible
	Number of devices	- one passive 4 ... 20 mA/HART field device - up to 4 HART field devices in multidrop mode
	Transfer rate	1200 Bit/s
	Parameters	primary/secondary master, preambles, retries and short address scan ranges
Output
Output variables		PV: loop current SV, TV, QV:configurable according to user requirement - adapter: temperature, battery voltage, energy consumed and estimated battery life-time - 4 ... 20 mA device: scaled or linearized process value - HART device: up to four process variables
Transfer characteristics
Accuracy		current input: 0.125 % of measuring range
Influence of ambient temperature		current input: 5 µA/K
Indicators/settings
Parameter assignment		- wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP) - device variables mapping - publishing of up to ten burst messages in a wireless network, period and trigger mode selectable - notification of up to five events from adapter and/or connected device(s) in a wireless network - scaling and linearization of 4 ... 20 mA signal of connected analog device - tuning of supply parameters for the connected device - locking/unlocking of device parameterization
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013, CLASS A
Radio and telecommunication terminal equipment		The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
	Directive 2014/53/EU	EN 300328 V2.1.1:2017 , EN 301489-17 V3.1.1:2017 , EN 301489-1 V2.1.1:2017
	FCC CFR47 Part 15 B and C	ANSI C63.4-2003
RoHs
	Directive 2011/65/EU (RoHS)	EN 50581:2012
Conformity
Degree of protection		IEC 60529
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Vibration resistance		20 ... 2000 Hz, 0,01 g²/Hz
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60
Mechanical specifications
Degree of protection		IP66
Material		Aluminum
Mass		approx. 1000 g
Dimensions		92 x 89.5 x 92.8 mm (without cable glands and antenna)
Mounting		mounting on field device , panel or pole mounting
Data for application in connection with hazardous areas
EU-Type Examination Certificate		BVS 17 ATEX E 029
	Marking	II 2G Ex ia IIC T4/T3 Gb II 2D Ex tb [ia] IIIC T70°C Db
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2014
International approvals
CSA approval
	Control drawing	116-0435
IECEx approval
	IECEx certificate	IECEX BVS 17.0023
Accessories
Designation		battery W-BAT-B2-Li mandatory for use in connection with hazardous areas (order separately) mounting set W-ACC-F8MK threads (NPT 1/2", NPT 3/4", G 1/2, M20)