Атол 30Ф не включается (заводской брак)
Валерий
14 января 2022
Запчасти и компоненты для торгового оборудования. Более 8 500 клиентов и более 1 000 000 товаров! Скрыть
| General specifications | ||
|---|---|---|
| Distance | Transmitter "K3": 300 m (1000 ft) Transmitter "K4": 120 m (400 ft) Transmitter "K5": 200 m (650 ft), 62.5 µ multimode 400 m (1300 ft), 50.0 µ multimode | |
| Supply | ||
| Connection | Monitor: power, CAT5, fiber (LC) | |
| Power consumption | Main unit: 48 W max, 100 ... 240 VAC, 50 ... 60 Hz 20-30 VDC Transmitter "K3": PS2 power Transmitter "K4": 5 VDC @ 10 W, max Transmitter "K5": 5 VDC @ 10 W, max | |
| Indicators/operating means | ||
| Indicators | Transmitter "K3": video check LED Transmitter "K4": video check LED front panel - power Transmitter "K5": video check LED front panel - power | |
| Display | ||
| Screen diagonal | 15 inch (381 mm) | |
| Response time | Standard: 30 ms High-bright : 25 ms | |
| Resolution | 1024 x 768 | |
| Color depth | 24 bit (16.7 M) color | |
| Contrast | Standard: 800:1 High-bright: 700:1 | |
| Brightness | Standard: 350 cd/m2 (nits) High-bright: 1200 cd/m2 (nits) | |
| Reading angle | 160° in all directions | |
| Life span | back lamp life: 50,000 hrs typical half life | |
| Input devices | Transmitter "K3": VGA - HD15M/F 2 x PS2 (keyboard & mouse) 1 x RS232 (touchscreen) 1 x RJ45 (CAT5e/6) Transmitter "K4": 29-pin DVI-D 2 x USB Type B (keyboard, mouse/touchscreen) 1 x RS232 (touchscreen) 1 x RJ45 (CAT5e/6) Transmitter "K5": 29-pin DVI-D 1 x USB Type B (keyboard, mouse/touchscreen) 1 x RS232 (touchscreen) fiber optic (multimode) LC connectors | |
| Touchscreen | 5-wire resistive 5-wire hardened resistive | |
| Keyboard | touchpad , optical trackball (50 mm) , joystick | |
| Serial data | ||
| Baud rate | 19.2 KBd max | |
| Flow control | RTS, CTS, DTR, DSR | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 89/336/EEC | EN55022A, EN61000-6-2, EN61000-3-2, EN61000-3-3 | |
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 0 ... 90% (noncondensing) | |
| Shock resistance | 30g, 11 ms, all axis | |
| Vibration resistance | 5 ... 100 Hz 1G, 12 m/s2 | |
| Mechanical specifications | ||
| Degree of protection | Type 4X ( stainless steel ) Type 4 ( painted steel ) IP66 | |
| Material | Main enclosure: painted black steel or 316L stainless steel Main enclosure (rear cover): 6062 anodized aluminum, marine grade | |
| Installation | 100 mm ( 3.9 inch ) VESA mount | |
| Mass | Main unit: 11.3 kg (25 lb) without keyboard 16.8 kg (37 lb) with keyboard Transmitter "K3": 1.3 kg (2.9 lbs) Transmitter "K4": 0.3 kg (0.7 lbs) Transmitter "K5": 0.3 kg (0.7 lbs) | |
| Dimensions | Main enclosure: 478 x 381 x 86 mm (18.8 x 15.0 x 3.4 inch), junction box adds 43 mm (1.7 inch) to depth Keyboard enclosure: 559 x 254 x 51 mm (22.0 x 10.0 x 2.0 inch) Transmitter "K3": 198 x 99 x 36 mm (7.8 x 3.9 x 1.4 inch) Transmitter "K4": 104 x 135 x 36 mm (4.1 x 5.3 x 1.4 inch) Transmitter "K5": 104 x 135 x 36 mm (4.1 x 5.3 x 1.4 inch) | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | ||
| Group, category, type of protection |  II 3G Ex ic nA IIC T4 Gc | |
| International approvals | ||
| ETL Intertek | Class I, Div. 2 Groups A, B, C, D T4 | |
| General specifications | ||
|---|---|---|
| Distance | Transmitter "K3": 300 m (1000 ft) Transmitter "K4": 120 m (400 ft) Transmitter "K5": 200 m (650 ft), 62.5 µ multimode 400 m (1300 ft), 50.0 µ multimode | |
| Supply | ||
| Connection | Monitor: power, CAT5, fiber (LC) | |
| Power consumption | Main unit: 60 W max, 100 ... 240 VAC, 50 ... 60 Hz 20-30 VDC Transmitter "K3": PS2 power Transmitter "K4": 5 VDC @ 10 W, max Transmitter "K5": 5 VDC @ 10 W, max | |
| Indicators/operating means | ||
| Indicators | Transmitter "K3": video check LED Transmitter "K4": video check LED front panel - power Transmitter "K5": video check LED front panel - power | |
| Display | ||
| Screen diagonal | 19 inch (483 mm) | |
| Response time | Standard: 12 ms High-bright: 5 ms | |
| Resolution | 1280 x 1024 | |
| Color depth | 24 bit (16.7 M) color | |
| Contrast | 1000:1 | |
| Brightness | Standard: 450 cd/m2 (nits) High-bright: 1000 cd/m2 (nits) | |
| Reading angle | 160° in all directions | |
| Life span | back lamp life: 50,000 hrs typical half life | |
| Input devices | Transmitter "K3": VGA - HD15M/F 2 x PS2 (keyboard & mouse) 1 x RS232 (touchscreen) 1 x RJ45 (CAT5e/6) Transmitter "K4": 29-pin DVI-D 2 x USB Type A (keyboard, mouse/touchscreen) 1 x RS232 (touchscreen) 1 x RJ45 (CAT5e/6) Transmitter "K5": 29-pin DVI-D 2 x USB Type A (keyboard, mouse/touchscreen) 1 x RS232 (touchscreen) fiber optic (multimode) LC connectors | |
| Touchscreen | 5-wire resistive 5-wire hardened resistive | |
| Serial data | ||
| Baud rate | 19.2 KBd max | |
| Flow control | RTS, CTS, DTR, DSR | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 89/336/EEC | EN55022A, EN61000-6-2, EN61000-3-2, EN61000-3-3 (main unit) EN55022, EN55024, IEC61000-4-2, IEC61000-4-3, IEC61000-4.4, IEC61000-4-5, EN61000-3-2, EN61000-3-3 (KVM transmitters) | |
| Low voltage | ||
| Directive 73/23/EEC | EN60950 (KVM transmitters) | |
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 0 ... 90% (noncondensing) | |
| Mechanical specifications | ||
| Degree of protection | Nema Type 4X | |
| Material | 304 (UNS S30400) stainless steel | |
| Mass | approx. 52.16 kg (115 lbs) Empty housing Varies with configuration | |
| Dimensions | 813 x 724 x 381 mm (32.0 x 28.5 x 15.0 inch) (sloping top) Volume: approx. 3.2 cu ft | |
| International approvals | ||
| UL approval | cULus | |
| Approved for | General purpose Class I, Division 2, Groups A, B, C, and D | |
| General specifications | ||
|---|---|---|
| Type | Panel PC | |
| Hardware | ||
| Processor | 1.06 GHz Intel® Core&trade 2 Duo | |
| RAM | 2 GB | |
| Mass storage | Windows 7: 32 GByte Solid State Drive Windows XP: 16 GByte or 32 GByte Solid State Drive | |
| Supply | ||
| Rated voltage | 24 V DC ( 20 ... 30 V DC ) | |
| Power consumption | max. 85 W | |
| Indicators/operating means | ||
| Display | ||
| Screen diagonal | 48.3 cm (19 inch) | |
| Resolution | 1280 x 1024 pixels representable: 640 x 480 up to 1280 x 1024 pixels | |
| Color depth | 16 Mio. | |
| Contrast | 1000:1 | |
| Brightness | 300 cd/m2 | |
| Reading angle | 89° / 89° / 89° / 89° | |
| Life span | 50000 h | |
| Input devices | ||
| Touchscreen | Analog resistive touchscreen (optional) | |
| Keyboard | Input device combined with keyboard and optional trackball/touchpad/joystick (optional) | |
| Interface | ||
| Interface type | USB , RS-485, RS-422, RS 232, Ethernet , TTY | |
| Software | ||
| Operating system | Windows XP Professional / Windows 7 Ultimate FES | |
| Ambient conditions | ||
| Operating temperature | -10 ... 50 °C (14 ... 122 °F) (at switching on) -20 ... 50 °C (-4 ... 122 °F) (when operating) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | max 85 % non-condensing (48 h endurance test) | |
| Mechanical specifications | ||
| Degree of protection | IP66 | |
| Installation | Mountable on floor, wall or ceiling several mounting options (turnable/fix) available | |
| Mass | approx. 41 kg | |
| Dimensions | 537 x 457 x 158 mm (display) 590 x 700 x 470 mm (surface-mounted case) | |
| Cut out dimensions | 466 mm x 389 mm | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | BVS 07 ATEX E 008 X 2nd Edition | |
| Group, category, type of protection | II 2 G Ex e mb q [ib] IIC T4 Gb II 2 D Ex tb [ib] IIIC T85°C Db II 3 (2) G Ex e mc q [ib Gb] IIC T4 Gc II 3 (2) D Ex tc [ib Db] IIIC T85°C Dc | |
| International approvals | ||
| IECEx approval | IECEx BVS 08.0030X | |
| General specifications | ||
|---|---|---|
| Type | Remote Monitor | |
| Hardware | ||
| Processor | Intel® Atom&trade Bay Trail E3827 1.75 GHz | |
| RAM | 2 GB DDR3L | |
| Mass storage | 32 GByte industrial grade MLC SSD | |
| Supply | ||
| Power consumption | AC: 115/230 V AC, 0.7 ... 0.4 A, 50/60 Hz, max. 50 W DC:18 ... 36 V DC, 3.0 ... 1.5 A | |
| Indicators/operating means | ||
| Display | ||
| Type | Liquid Crystal Display (LCD) with LED backlight | |
| Screen diagonal | 54.61 cm (21,5 '') | |
| Resolution | 1920 x 1080 pixels (Full HD) Aspect ratio 16:9 | |
| Color depth | 24 bit (16.7 M) color | |
| Contrast | 5000:1 (typically) | |
| Brightness | 300 cd/m2 | |
| Reading angle | 175° in all directions | |
| Life span | back lamp life: 50.000 hrs typical half life , at 25 °C (77 °F) | |
| Input devices | ||
| Touchscreen | optional: projective capacitive 10 finger multi-touch, glove friendly | |
| Keyboard | Foil keyboard with different pointing device options available (see EXTA2 datasheet) | |
| Interface | ||
| Interface type | 1x 1000BASE-T LAN Ex e, 1x USB Ex e, 2x USB Ex i 1x DC/AC power in (via Power Supply Unit) 1x 1000BASE-SX Fiber Optic (multi-mode, LC connector) (alternative to 1000BASE-TX) Options for module slots A and B: 1x barcode reader interface Ex i 1x RS-232 Ex e 1x RS-485 Ex e 1x 1000BASE-T LAN Ex e | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) EN 61000-6-4:2007+A1:2011 | |
| RoHs | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012-09 | |
| Software | ||
| Operating system | VisuNet RM Shell 4.x (based on Microsoft® Windows&trade Embedded Standard 7) | |
| Ambient conditions | ||
| Operating temperature | 0 ... 50 °C (32 ... 122 °F) (normal operation) -20 ... 50 °C (-4 ... 122 °F) (after 1 hour of operation) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 93% at 40°C, non-condensating, according to EN60068-2-78 | |
| Altitude | Operating altitude max. 2000 m | |
| Shock resistance | 18 shocks 15 g , 11 ms all axis, IEC 60068-2-27 | |
| Vibration resistance | 10 ... 150 Hz, +/- 0.075 mm , 1g, 10 cycles per axis according to EN60068-2-6 | |
| Mechanical specifications | ||
| Degree of protection | IP66 (individual components and entire system with housing) | |
| Material | Panel: anodized aluminum (TCU, PSU), powder coated aluminum (DPU) Bezel: stainless steel AISI 304 (1.4301) System housing: stainless steel AISI 304 (1.4301), ceramic blasted | |
| Installation | Flush-mount installation (requires customized mounting kit) Panel-mount installation into system housing with bezel Panel-mount installation into cabinet with Bezel and standard mounting kit | |
| Mass | Panel (DPU with bezel, TCU, PSU DC): approx. 23 kgPanel (DPU with bezel, TCU, PSU AC): approx. 24 kgSystem housing (AG-XX00): approx. 11 kg | |
| Dimensions | Panel (DPU with bezel, TCU, PSU DC): 625x459x120 mm Panel (DPU with bezel, TCU, PSU AC): 625x459x137 mm Panel with system housing: 625x459x173 mm | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | BVS 17 ATEX E 036 X | |
| Marking | II 2G Ex eb q ib [ib] IIC T4 IP66 Gb II 2D Ex tb [ib] IIIC T85°C IP66 Db | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013, EN 60079-5:2015, EN 60079-7:2015, EN 60079-11:2012, EN 60079-31:2014 | |
| International approvals | ||
| UL approval | E492874 | |
| Approved for | Class I, Division 2, Groups A, B, C, D T4 Zone 2, Group IIC T4 Class II, Division 2, Groups F, G T4 Zone 22, Group IIIB T85 Class III Zone 22, Group IIIA T85 | |
| IECEx approval | IECEx BVS 17.0029X | |
| Approved for | Ex eb q ib [ib] IIC T4 IP66 Gb Ex tb [ib] IIIC T85°C IP66 Db | |
| Standards | IEC 60079-0:2011, IEC 60079-5:2015, IEC 60079-7:2015, IEC 60079-11:2011, IEC 60079-31:2013 | |
| Описание оборудования | ||
|---|---|---|
| 12 inch flat panel monitor for Class I, Div 2 Class II, Div 2 and Atex Zone 2 applications. | ||
| General specifications | ||
|---|---|---|
| Type | Remote Monitor | |
| Hardware | ||
| Processor | Intel® Atom&trade Bay Trail E3827 1.75 GHz | |
| RAM | 2 GB DDR3L | |
| Mass storage | 32 GByte industrial grade MLC SSD | |
| Supply | ||
| Power consumption | AC: 115/230 V AC, 0.7 ... 0.4 A, 50/60 Hz, max. 50 W DC:18 ... 36 V DC, 3.0 ... 1.5 A | |
| Indicators/operating means | ||
| Display | ||
| Type | Liquid Crystal Display (LCD) with LED backlight | |
| Screen diagonal | 54.61 cm (21,5 '') | |
| Resolution | 1920 x 1080 pixels (Full HD) Aspect ratio 16:9 | |
| Color depth | 24 bit (16.7 M) color | |
| Contrast | 5000:1 (typically) | |
| Brightness | 300 cd/m2 | |
| Reading angle | 175° in all directions | |
| Life span | back lamp life: 50.000 hrs typical half life , at 25 °C (77 °F) | |
| Input devices | ||
| Touchscreen | optional: projective capacitive 10 finger multi-touch, glove friendly | |
| Keyboard | Foil keyboard with different pointing device options available (see EXTA2 datasheet) | |
| Interface | ||
| Interface type | 1x 1000BASE-T LAN Ex e, 1x USB Ex e, 2x USB Ex i 1x DC/AC power in (via Power Supply Unit) 1x 1000BASE-SX Fiber Optic (multi-mode, LC connector) (alternative to 1000BASE-TX) Options for module slots A and B: 1x barcode reader interface Ex i 1x RS-232 Ex e 1x RS-485 Ex e 1x 1000BASE-T LAN Ex e | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) EN 61000-6-4:2007+A1:2011 | |
| RoHs | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012-09 | |
| Software | ||
| Operating system | VisuNet RM Shell 4.x (based on Microsoft® Windows&trade Embedded Standard 7) | |
| Ambient conditions | ||
| Operating temperature | 0 ... 50 °C (32 ... 122 °F) (normal operation) -20 ... 50 °C (-4 ... 122 °F) (after 1 hour of operation) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 93% at 40°C, non-condensating, according to EN60068-2-78 | |
| Altitude | Operating altitude max. 2000 m | |
| Shock resistance | 18 shocks 15 g , 11 ms all axis, IEC 60068-2-27 | |
| Vibration resistance | 10 ... 150 Hz, +/- 0.075 mm , 1g, 10 cycles per axis according to EN60068-2-6 | |
| Mechanical specifications | ||
| Degree of protection | IP66 (individual components and entire system with housing) | |
| Material | Panel: anodized aluminum (TCU, PSU), powder coated aluminum (DPU) Bezel: stainless steel AISI 304 (1.4301) System housing: stainless steel AISI 304 (1.4301), ceramic blasted | |
| Installation | Flush-mount installation (requires customized mounting kit) Panel-mount installation into system housing with bezel Panel-mount installation into cabinet with Bezel and standard mounting kit | |
| Mass | Panel (DPU with bezel, TCU, PSU DC): approx. 17.5 kg Panel (DPU with bezel, TCU, PSU AC): approx. 18 kg System housing: approx. 11 kg | |
| Dimensions | Panel (DPU with bezel, TCU, PSU DC): 625x459x120 mm Panel (DPU with bezel, TCU, PSU AC): 625x459x137 mm Panel with system housing: 625x459x173 mm | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | BVS 17 ATEX E 036 X | |
| Marking | II 3G Ex ec [ib] q IIC T4 IP66 Gc II 3D Ex tc [ib] IIIC T85 °C IP66 Dc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013, EN 60079-7:2015, EN 60079-11:2012, EN 60079-31:2014 | |
| International approvals | ||
| UL approval | E492874 | |
| Approved for | Class I, Division 2, Groups A, B, C, D T4 Zone 2, Group IIC T4 Class II, Division 2, Groups F, G T4 Zone 22, Group IIIB T85 Class III Zone 22, Group IIIA T85 | |
| IECEx approval | IECEx BVS 17.0029X | |
| Approved for | Ex ec [ib] q IIC T4 IP66 Gc Ex tc [ib] IIIC T85 °C IP66 Dc | |
| Standards | IEC 60079-0:2011, IEC 60079-7:2015, IEC 60079-11:2011, IEC 60079-31:2013 | |
| General specifications | ||
|---|---|---|
| Type | Direct Monitor | |
| Supply | ||
| Power supply | 24 V DC | |
| Power consumption | 40 W | |
| Indicators/operating means | ||
| Display | ||
| Type | TFT, LCD, High Color (19 bit) | |
| Screen diagonal | 48.3 cm (19 inch) | |
| Resolution | 1280 x 1024 Pixel | |
| Color depth | 16.7 Mio. | |
| Brightness | 300 cd/m2 | |
| Input devices | Analog resistive touchscreen (optional) , Keyboard with integrated mouse functionality: optical trackball/touchpad/joystick versions available | |
| Interface | ||
| Interface type | VGA or DVI | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Surface quality | Ra 0.8 µm | |
| Mounting type | slim line housing several mounting types (pedestal, wall bracket, wall arm - each turnable or fix) available | |
| Mass | approx. 12 kg | |
| Dimensions | 568 mm x 450 mm x 73 mm | |
| Описание оборудования | ||
|---|---|---|
| 10 inch flat panel monitor for general purpose applications. | ||
| General specifications | ||
|---|---|---|
| Distance | Transmitter "K3": 300 m (1000 ft) Transmitter "K4": 120 m (400 ft) Transmitter "K5": 200 m (650 ft), 62.5 µ multimode 400 m (1300 ft), 50.0 µ multimode | |
| Supply | ||
| Connection | Monitor: power, CAT5, fiber (LC) | |
| Power consumption | Main unit: 48 W max, 100 ... 240 VAC, 50 ... 60 Hz 20-30 VDC Transmitter "K3": PS2 power Transmitter "K4": 5 VDC @ 10 W, max Transmitter "K5": 5 VDC @ 10 W, max | |
| Indicators/operating means | ||
| Indicators | Transmitter "K3": video check LED Transmitter "K4": video check LED front panel - power Transmitter "K5": video check LED front panel - power | |
| Display | ||
| Screen diagonal | 15 inch (381 mm) | |
| Response time | Standard: 30 ms High-bright : 25 ms | |
| Resolution | 1024 x 768 | |
| Color depth | 24 bit (16.7 M) color | |
| Contrast | Standard: 800:1 High-bright: 700:1 | |
| Brightness | Standard: 350 cd/m2 (nits) High-bright: 1200 cd/m2 (nits) | |
| Reading angle | 160° in all directions | |
| Life span | back lamp life: 50,000 hrs typical half life | |
| Input devices | Transmitter "K3": VGA - HD15M/F 2 x PS2 (keyboard & mouse) 1 x RS232 (touchscreen) 1 x RJ45 (CAT5e/6) Transmitter "K4": 29-pin DVI-D 2 x USB Type B (keyboard, mouse/touchscreen) 1 x RS232 (touchscreen) 1 x RJ45 (CAT5e/6) Transmitter "K5": 29-pin DVI-D 1 x USB Type B (keyboard, mouse/touchscreen) 1 x RS232 (touchscreen) fiber optic (multimode) LC connectors | |
| Touchscreen | 5-wire resistive 5-wire hardened resistive | |
| Keyboard | touchpad , optical trackball (50 mm) , joystick | |
| Serial data | ||
| Baud rate | 19.2 KBd max | |
| Flow control | RTS, CTS, DTR, DSR | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 89/336/EEC | EN55022A, EN61000-6-2, EN61000-3-2, EN61000-3-3 | |
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 0 ... 90% (noncondensing) | |
| Shock resistance | 30g, 11 ms, all axis | |
| Vibration resistance | 5 ... 100 Hz 1G, 12 m/s2 | |
| Mechanical specifications | ||
| Degree of protection | Type 4X ( stainless steel ) Type 4 ( painted steel ) IP66 | |
| Material | Main enclosure: painted black steel or 316L stainless steel Main enclosure (rear cover): 6062 anodized aluminum, marine grade | |
| Installation | 100 mm ( 3.9 inch ) VESA mount | |
| Mass | Main unit: 11.3 kg (25 lb) without keyboard 16.8 kg (37 lb) with keyboard Transmitter "K3": 1.3 kg (2.9 lbs) Transmitter "K4": 0.3 kg (0.7 lbs) Transmitter "K5": 0.3 kg (0.7 lbs) | |
| Dimensions | Main enclosure: 478 x 381 x 86 mm (18.8 x 15.0 x 3.4 inch), junction box adds 43 mm (1.7 inch) to depth Keyboard enclosure: 559 x 254 x 51 mm (22.0 x 10.0 x 2.0 inch) Transmitter "K3": 198 x 99 x 36 mm (7.8 x 3.9 x 1.4 inch) Transmitter "K4": 104 x 135 x 36 mm (4.1 x 5.3 x 1.4 inch) Transmitter "K5": 104 x 135 x 36 mm (4.1 x 5.3 x 1.4 inch) | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | ||
| Group, category, type of protection | II 3G Ex ic nA IIC T4 Gc | |
| International approvals | ||
| ETL Intertek | Class I, Div. 2 Groups A, B, C, D T4 | |
| Описание оборудования | ||
|---|---|---|
| Environmental purge for nonhazardous dusty/dirty areas | ||
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 250 V max. | |
| Operating current | 16 A max. | |
| Terminal capacity | 2.5 mm2 | |
| Function | double pushbutton | |
| Color | red / green | |
| Contact configuration | 1x NO / 1x NC | |
| Usage category | AC12 - 12 ... 250 V AC - 16 A AC15 - 12 ... 250 V AC - 10 A DC13 - 12 ... 110 V DC - 1 A DC13 - 12 ... 24 V DC - 1A | |
| Number of poles | 2 | |
| Labeling | 0 - I | |
| Mechanical specifications | ||
| Height | 110 mm (A) | |
| Width | 110 mm (B) | |
| Depth | 101 mm (C) | |
| External dimension | 116 mm with operators (C1) 125 mm with mounting brackets (K) | |
| Fixing holes distance, height | 110 mm (G) | |
| Fixing holes distance, width | 78 mm (H) | |
| Enclosure cover | fully detachable | |
| Cover fixing | M6 stainless steel socket cap head screws | |
| Fixing holes diameter | 7 mm (J) | |
| Degree of protection | IP66 | |
| Cable entry | ||
| Number of cable entries | 1x M20 in face B fitted with polyamide Ex e cable gland | |
| Defined entry area | face B | |
| Material | ||
| Enclosure | carbon loaded, antistatic glass fiber reinforced polyester (GRP) | |
| Finish | inherent color black | |
| Seal | one piece solid silicone rubber | |
| Mass | 1.5 kg | |
| Mounting | 7 mm slots moulded into base | |
| Grounding | 2.5 mm2 grounding terminal | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) @ T4 -40 ... 40 °C (-40 ... 104 °F) @ T6 | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | CML 16 ATEX 3009 X | |
| Marking | II 2 GD Ex db eb mb IIC T* Gb Ex tb IIIC T** °C Db T6/T80 °C @ Ta +40 °C T4/T130 °C @ Ta +55 °C | |
| International approvals | ||
| IECEx approval | IECEx CML 16.0008X | |
| EAC approval | TC RU C-DE.GB06.B.00567 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Optional accessories | Engraved traffolyte tag label Engraved AISI 316L stainless steel tag label Color in-fill stainless steel tag label | |
| Mechanical specifications | ||
|---|---|---|
| Degree of protection | IP65 (IP67 with O-ring) | |
| Material | ||
| Enclosure | Aluminum alloy | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) (+40 °C (104 °F)) | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | INERIS 05 ATEX 0030 | |
| Group, category, type of protection, temperature class | II 2 GD EEx d IIC | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Functional safety related parameters | ||
|---|---|---|
| Safety Integrity Level (SIL) | SIL 3 | |
| Supply | ||
| Connection | SL1: 1a, 1b(-) 2a, 2b(+) | |
| Rated voltage | 20.4 ... 30 V DC via Termination Board | |
| Rated current | 28 mA at 24 V , RS-485, quiescent current | |
| Power dissipation | 0.7 W at 24 V | |
| HART signal channels (non-intrinsically safe) | ||
| Number of channels | 32 | |
| Conformity | HART field device input (revision 5 to 7) | |
| Signal range | 0.12 Vpp < signal < 1.5 Vpp | |
| Leakage current | < 3 µA at -20 ... 85 °C (-4 ... 185 °F) | |
| Terminating resistor | external 230 ... 500 &Omega standard (up to 1000 &Omega possible) | |
| Output voltage | &ge 400 mV ss (with the terminator resistance specified above) | |
| Output resistance | 100 &Omega or smaller, capacitive coupling | |
| DC isolation | dual capacitor each channel | |
| Common mode voltage | up to 30 V | |
| Input impedance | > 5 k&Omega , according to HART specification | |
| Input voltage range | 0.12 ... 1.5 V ss | |
| Common mode voltage | max. 30 V | |
| Differential mode clamping | ± 5.2 V , for transient or AC signals | |
| Common mode clamping | ± 10 V , for transient or AC signals | |
| Carrier detect level | signal > 0.12 Vpp, carrier detection activated signal < 0.08 Vpp, carrier detection not activated | |
| Transmit amplitude | 200 &Omega load, 0.43 Vpp < signal < 0.49 Vpp 500 &Omega load, 1.1 Vpp < signal < 1.2 Vpp | |
| Device type | DC isolated bus device | |
| Impedance | high impedance | |
| Data link type | HART primary and secondary | |
| Field multi point support | option available upon request | |
| Interface | ||
| Transfer rate | 9600 MBit/s, 19200 MBit/s or 38400 MBit/s, selectable via switch | |
| Address | 1 ... 31 , adjustable via DIP switch | |
| Type | RS-485 , differential pair and grounding | |
| Topology | multi point, master/slave connection | |
| Indicators/settings | ||
| Display elements | LEDs LED PWR ON (power supply), one green LED LED HART TX (HART transmission), one yellow LED LED FAULT (lead fault), one red LED | |
| Control elements | DIP switches at the housing side for: - unit slave address - baud rate - test mode on/off | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2012 For further information see system description. | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 140 g | |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) | |
| Mounting | on Termination Board | |
| Data for application in connection with hazardous areas | ||
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
| International approvals | ||
| CSA approval | 1256050 | |
| Approved for | Class I, Division 2, Groups A, B, C, D Class I, Zone 2, IIC | |
| Functional safety related parameters | ||
|---|---|---|
| Safety Integrity Level (SIL) | SIL 3 | |
| Supply | ||
| Connection | terminals 17+, 18- | |
| Rated voltage | 20 ... 32 V DC typical at 100 mA | |
| Power consumption | max. 3 W | |
| HART signal channels (non-intrinsically safe) | ||
| Conformity | HART field device input (revision 5 to 7) | |
| Connection | 26-pin flat cable for analog connections 14-pin flat cable for master-slave connection between KFD2-HMM-16 and KFD0-HMS-16 | |
| Leakage current | < 3 µA at -20 ... 85 °C (-4 ... 185 °F) | |
| Terminating resistor | external 230 ... 500 &Omega standard (up to 1000 &Omega possible) | |
| Output voltage | &ge 400 mV ss (with the terminator resistance specified above) | |
| Output resistance | 100 &Omega or smaller, capacitive coupling | |
| Input impedance | according to HART specification | |
| Input voltage range | 0.08 ... 4 V ss typ. ± 5.2 V as local reference | |
| Interface | ||
| Transfer rate | 9600, 19200, or 38400 Bit/s (selectable with DIL switch (2 and 3) by the user) | |
| Type | RS-485 , 2-wire multidrop | |
| Address selection | One of 31 possible addresses selectable per DIL switch (4 ... 8) | |
| Indicators/settings | ||
| Control elements | DIP-switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 250 g | |
| Dimensions | 40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) , housing type C1 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| Certificate | PF 07 CERT 1143 X | |
| Marking | II 3G Ex nA IIC T4 Gc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
| Functional safety related parameters | ||
|---|---|---|
| Safety Integrity Level (SIL) | SIL 3 | |
| Supply | ||
| Connection | via 14-channel flat cable form master KFD2-HMM-16 | |
| HART signal channels (non-intrinsically safe) | ||
| Conformity | HART field device input (revision 5 to 7) | |
| Connection | 26-pin flat cable for analog connections 14-pin flat cable for master-slave connection between KFD2-HMM-16 and KFD0-HMS-16 | |
| Leakage current | < 3 µA at -20 ... 85 °C (-4 ... 185 °F) | |
| Terminating resistor | external 230 ... 500 &Omega standard (up to 1000 &Omega possible) | |
| Output voltage | &ge 400 mV ss (with the terminator resistance specified above) | |
| Output resistance | 100 &Omega or smaller, capacitive coupling | |
| Input impedance | according to HART specification | |
| Input voltage range | 0.08 ... 4 V ss typ. ± 5.2 V as local reference | |
| Indicators/settings | ||
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 100 g | |
| Dimensions | 20 x 93 x 115 mm (0.8 x 3.7 x 4.5 inch) , housing type B1 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| Certificate | PF 07 CERT 1143 X | |
| Marking | II 3G Ex nA IIC T4 Gc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
| General specifications | ||
|---|---|---|
| Suitable components | backplane LB9024S , LB8105* , LB8106* , LB8108* , LB8109* , LB8107* | |
| Slots | ||
| Bus coupler | 2 | |
| Supply | 3 | |
| Output shut-down | 5 SIL2 output shutdown segments slots 3 ... 5, 6 ... 10, 11 ... 15, 16 ... 20, 21 ... 24 | |
| I/O modules (single width) | max. 22 | |
| I/O modules (dual width) | max. 11 | |
| Supply | ||
| Maximum safe voltage | 60 V DC (SELV/PELV) | |
| Input voltage range | 18 ... 32 V DC (SELV/PELV) | |
| Fieldbus interface | ||
| Fieldbus type | PROFIBUS DP/DP-V1 or MODBUS RTU , depends on bus coupler | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2006 | |
| Conformity | ||
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | EN 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) , 70 °C (non-Ex) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 | |
| Vibration resistance | frequency range 10 ... 150 Hz transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g 10 cycles frequency range 5 ... 100 Hz transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g 90 minutes at each resonance | |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 2170 g | |
| Dimensions | (W x H x D) 605 x 127 x 80 mm (23.8 x 5 x 3.15 inch) , without modules | |
| Data for application in connection with hazardous areas | ||
| Certificate | PF 08 CERT 1234 X | |
| Marking | II 3 G Ex nA IIC T4 Gc | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2009 EN 60079-15:2010 | |
| International approvals | ||
| ATEX approval | PF 08 CERT 1234 X | |
| UL approval | E106378 | |
| Control drawing | 116-0321 | |
| Approved for | cUL (Canada): CL I Zn. 2 IIC IS circuits for CL I Zn. 0 IIC ULus (USA): CL I Div. 2 Grp. A, B, C, D IS circuits for CL I, II, III Div. 1 Grp. A, B, C, D, E, F, G | |
| IECEx approval | BVS 09.0037X | |
| Approved for | Ex nA IIC T4 Gc | |
| EAC approval | Russia: RU C-IT.MIII06.B.00129 | |
| Marine approval | ||
| Lloyd Register | 15/20021 | |
| American Bureau of Shipping | T1450280/UN | |
| Bureau Veritas Marine | 22449/B0 BV | |
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 660 V DC / 1000 V AC max. | |
| Operating current | 1600 A max. | |
| Mechanical specifications | ||
| Enclosure cover | detachable , optional hinges | |
| Cover fixing | Stainless steel hexagonal head screws | |
| Degree of protection | IP66 (IP67 with O-ring) | |
| Cable entry | see PDF data sheet | |
| Defined entry area | see PDF data sheet | |
| Material | ||
| Enclosure | Aluminum alloy | |
| Finish | painted grey | |
| Mass | see PDF data sheet | |
| Mounting | see PDF data sheet | |
| Ambient conditions | ||
| Ambient temperature | see PDF data sheet | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | ||
| Group, category, type of protection, temperature class | [Ex] II 2 GD Ex d IIB+H2 Gb (EJB20 / 20 A in aluminum: Ex d IIB) Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx INE 14.0029X | |
| Conformity | ||
| Degree of protection | EN60529 | |
| General information | ||
| Ordering information | This Solution will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 660 V DC / 1000 V AC max. | |
| Operating current | ASM enclosure: 500 A max. EJB enclosure: 1600 A max. GUB enclosure: 1000 A max. | |
| Mechanical specifications | ||
| Height | see PDF data sheet | |
| Width | see PDF data sheet | |
| Depth | see PDF data sheet | |
| Fixing holes distance, height | see PDF data sheet | |
| Fixing holes distance, width | see PDF data sheet | |
| Enclosure cover | hinged | |
| Cover fixing | see PDF data sheet | |
| Fixing holes diameter | see PDF data sheet | |
| Degree of protection | see PDF data sheet | |
| Material | ||
| Enclosure | aluminum and stainless steel | |
| Finish | see PDF data sheet | |
| Seal | see PDF data sheet | |
| Mass | see PDF data sheet | |
| Mounting | see PDF data sheet | |
| Ambient conditions | ||
| Ambient temperature | -20/-40 /-50 ... 55 °C (-4/-40/-58 ... 131 °F) details see PDF data sheet | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | see PDF data sheet | |
| Group, category, type of protection, temperature class | II 2 GD ASM enclosures: Ex d IIB Gb, Ex tb IIIC Db EJB enclosures: Ex d IIB+H2 Gb, Ex tb IIIC Db EJB20 / EJB20A in aluminum: Ex d IIB Gb, Ex tb IIIC Db GUB enclosures: Ex d IIC Gb, Ex tb IIIC Db FS* Termination and Control Station: Ex de IIC T6, T5, T4 Gb Ex ib IIC T6, T5, T4 Gb Ex de ib IIC T6, T5, T4 Gb Ex tb IIIC T80 °C, T95 °C, T130 °C Db | |
| International approvals | ||
| IECEx approval | see PDF data sheet | |
| Conformity | ||
| Degree of protection | EN60529 | |
| General information | ||
| Ordering information | This device will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Описание оборудования | ||
|---|---|---|
| 230 V AC | ||
| Описание оборудования | ||
|---|---|---|
| Switch Amplifier | ||
| Mechanical specifications | ||
|---|---|---|
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size | M20 (TD) | |
| Thread type female | metric ISO pitch 1.5 mm | |
| Thread size female | M16 (TF) | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Washer gasket | aramid fibers bonded with NBR | |
| Adapter | brass, nickel-plated | |
| O-Ring | chloroprene | |
| Mass | 39 g | |
| Dimensions | ||
| Width across corners | 27.5 mm (D2) | |
| Length outside enclosure | 4 mm (H) | |
| Width across flats | 25 mm (SW1) | |
| Thread length | 15 mm (TL) | |
| Thread length female | 19 mm (TLF) | |
| Total length | 19 mm (L) | |
| Tightening torque | ||
| Nut torque at enclosure | 6 Nm (SW1) | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 100 °C (-40 ... 212 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | CESI 15ATEX029X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx CES 15.0006X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Scope of delivery | Adapter Lock nut washer gasket brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Signal type | Analog input | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | Power Rail or terminals 23+, 24- | |
| Rated voltage | 20 ... 30 V DC | |
| Rated current | approx. 130 mA | |
| Power dissipation | 2 W | |
| Power consumption | 2.5 W | |
| Interface | ||
| Programming interface | programming socket | |
| Input | ||
| Connection side | field side | |
| Connection | terminals 1, 2, 3 | |
| Input I | ||
| Input signal | 0/4 ... 20 mA | |
| Available voltage | &ge 15 V at 20 mA | |
| Open circuit voltage/short-circuit current | 24 V / 33 mA | |
| Input resistance | 45 &Omega (terminals 2, 3) | |
| Line fault detection | breakage I < 0.2 mA short-circuit I > 22 mA | |
| Output | ||
| Connection side | control side | |
| Connection | output I: terminals 10, 11, 12 output II: terminals 16, 17, 18 Output: analog terminals 8+, 7- | |
| Output signal | 0 ... 20 mA or 4 ... 20 mA | |
| Output I, II | signal, relay | |
| Contact loading | 250 V AC / 2 A / cos &phi &ge 0.7 40 V DC / 2 A | |
| Mechanical life | 5 x 107 switching cycles | |
| Output III | Signal, analog | |
| Current range | 0 ... 20 mA or 4 ... 20 mA | |
| Open loop voltage | max. 24 V DC | |
| Load | max. 650 &Omega | |
| Fault signal | downscale I &le 3.6 mA, upscale I &ge 21.5 mA (acc. NAMUR NE43) | |
| Indicators/settings | ||
| Display elements | LEDs , display | |
| Control elements | Control panel | |
| Configuration | via operating buttons via PACTware | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Low voltage | ||
| Directive 2014/35/EU | EN 61010-1:2010 | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | 300 g | |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| International approvals | ||
| UL approval | E223772 | |
| HART signal channels (non-intrinsically safe) | ||
|---|---|---|
| Load resistor | 220 &Omega , switchable on | |
| Interface | ||
| Type | multiplexer connection : 26-pin NFP-26A (Yamaichi) | |
| Signal lines | ||
| Rated current | max. 30 mA per channel | |
| Indicators/settings | ||
| DIP switch | selection of operating mode: - ON: without load resistor - OFF: with load resistor | |
| Factory setting | DIP switches S1 and S2: ON | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2012 For further information see system description. | |
| Degree of protection | IEC 60529:2001 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -15 ... 50 °C (5 ... 122 °F) | |
| Relative humidity | &le 93 % non-condensing | |
| Shock resistance | 15 g , 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | ||
| Field side | screw terminals , green | |
| Control side | screw terminals , green HART : 1 x IDC plug, 26-pin | |
| Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 16 AWG) | |
| Mass | approx. 200 g | |
| Dimensions | 110 x 125 x 67 mm (4.3 x 4.9 x 2.6 inch) | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
| Supply | ||
|---|---|---|
| Rated voltage | 20 ... 30 V DC | |
| Fusing | 3.15 A , 5 x 20 mm (0.2 x 0.8 inch) | |
| Power dissipation | 0.7 W , with Multiplexer | |
| Reverse polarity protection | yes | |
| HART signal channels (intrinsically safe) | ||
| HART signal channels | ||
| Number of channels | 32 unbalanced signal loops | |
| Redundancy | ||
| Supply | yes | |
| Galvanic isolation | ||
| HART signal channels | 30 V DC | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 55 °C (-4 ... 131 °F) | |
| Relative humidity | 5 ... 90 %, non-condensing | |
| Mechanical specifications | ||
| Core cross-section | 2.5 mm2 (16 AWG) | |
| Connection | field side: fixed screw terminals control side: fixed screw terminals RS 485 interface: removable screw terminals power: removable screw terminals | |
| Mass | approx. 500 g | |
| Dimensions | without HiDMux2700: 222 x 122 x 79 mm (8.7 x 4.8 x 3.1 inch) with HiDMux2700: 222 x 122 x 208 mm (8.7 x 4.8 x 8.2 inch) | |
| Mounting | DIN rail mounting | |
| Описание оборудования | ||
|---|---|---|
| 24 V DC | ||
| Описание оборудования | ||
|---|---|---|
| Transmission range 4 mA ... 20 mA | ||
| General specifications | ||
|---|---|---|
| Signal type | Analog input | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | Power Rail or terminals 9+, 10- | |
| Rated voltage | 19 ... 30 V DC | |
| Ripple | within the supply tolerance | |
| Rated current | < 20 mA | |
| Power consumption | 0.35 W (24 V and 1 mA sense current) | |
| Input | ||
| Connection side | field side | |
| Connection | terminals 1, 2, 3, 4 | |
| Line fault detection | yes , at Pt100 | |
| Lead resistance | &le 10 % of resistance value | |
| Transmission range | 0 ... 10 mA | |
| Available voltage | 9 V | |
| Line fault detection | 8 nA | |
| Output | ||
| Connection side | control side | |
| Connection | terminals 5-, 7-, 6+, 8+ | |
| Current | 0 ... 10 mA | |
| Available voltage | 0 ... 4.2 V | |
| Fault signal | < 10 &Omega or > 400 &Omega, depending on lead disconnected (measuring current &le 1 mA) > 400 &Omega, terminal 3 lead disconnected in 2-/4-wire (measuring current &le 0.3 mA) | |
| Transfer characteristics | ||
| Accuracy | 0.1 % | |
| Deviation | 4-wire Im &ge 1 mA: ±0.1 % of Rm or ± 0.1 &Omega (the larger value is applicable) Im < 1 mA: accuracy reduces in proportion to Im. e. g. Im = 0.1 mA: ± 1 % of Rm or 1 &Omega (the larger value is applicable). 3-wire Im &ge 1 mA: (±0.1 % - 0.1 &Omega Offset) or ± 0.2 &Omega (the larger value is applicable) Im < 1 mA: accuracy reduces in proportion to Im. e. g. Im = 0.1 mA: (±1 % - 0.1 &Omega Offset) or ± 1.1 &Omega (the larger value is applicable) | |
| Rise time | signal response time &le 2 ms (10 ... 90 %) response to application of Im: Rm > 50 &Omega and Im < 5mA: < 5ms response to application of Im: Rm > 30 &Omega and Im < 5mA: < 10ms response to application of Im: Rm > 18 &Omega and Im < 5mA: < 20ms | |
| Indicators/settings | ||
| Display elements | LED | |
| Control elements | DIP-switch | |
| Configuration | via DIP switches | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 100 g | |
| Dimensions | 12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 inch) , housing type A2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | BASEEFA 10 ATEX 0061 | |
| Marking | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I | |
| Certificate | BASEEFA 10 ATEX 0062X | |
| Marking | II 3G Ex nA II T4 Gc [device in zone 2] | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| FM approval | ||
| Control drawing | 116-0129 (cFMus) | |
| UL approval | ||
| Control drawing | 116-0332 (cULus) | |
| IECEx approval | IECEx BAS 10.0024 IECEx BAS 10.0025X | |
| Approved for | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I | |
| Accessories | ||
| Designation | optional accessories: insertion bridge EBP 2- 5 | |
| Описание оборудования | ||
|---|---|---|
| Field Unit, Polyester (GRP) | ||
| General specifications | ||
|---|---|---|
| Installed components | backplane LB9023A | |
| Slots | ||
| Bus coupler | 1 | |
| Supply | 1 | |
| I/O modules (single width) | max. 8 | |
| I/O modules (dual width) | max. 4 | |
| Supply | ||
| Connection | screw terminals, max. 10 mm2 | |
| Rated voltage | 24 V DC | |
| Maximum safe voltage | 60 V | |
| Fieldbus interface | ||
| Fieldbus type | PROFIBUS DP/DP-V1 or MODBUS RTU , depends on bus coupler | |
| Electrical specifications | ||
| Permissible power | wall mounting: 43 W (at 40 °C (104 °F)) , 21.5 W (at 50 °C (122 °F)) | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2006 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 55 °C (-4 ... 131 °F) at T4 , depending on the permissible power | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP66, NEMA 4X | |
| Mass | approx. 10 kg , without modules | |
| Dimensions | (W x H x D) 350 x 306 x 215 mm (13.8 x 12 x 8.5 inch) | |
| Mounting | thru-holes Ø11 mm | |
| Data for application in connection with hazardous areas | ||
| Statement of conformity | PF 08 CERT 1267 | |
| Group, category, type of protection | II 3 G Ex nA nC [ic] IIC/IIB T4 II 3 (2) G Ex nA nC [ib] IIC T4 II 3 (1) G Ex nA nC [ia] IIC/IIB T4 II 3 D Ex tD A22 IP65 T 130°C II (2) D [Ex ib] IIIC II (1) D [Ex ia] IIIC | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2009 EN 60079-11:2007 EN 60079-15:2005 EN 61241-0:2006 EN 61241-1:2004 EN 61241-11:2006 EN 61010-1:2001 | |
| Supply | ||
|---|---|---|
| Rated voltage | 8.2 V ± 2 V | |
| Current consumption | < 1.0 mA unswitched (de-energized at the bottom), > 2.2 mA switched (floated up at the top) | |
| Reverse polarity protection | yes | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 60947-5-2:2007+A1:2012 | |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Application | ||
| Description | Proximity switch with operation ball | |
| Function and system design | ||
| Equipment architecture | A measuring system consists of a float switch LFL1-**-N and a transformer isolated barrier, e. g. KFD2-SR2-Ex1.W. | |
| Operating conditions | ||
| Installation conditions | ||
| Installation instructions | range of application and minimum length between mounting and float: - PVC version: &ge 50 mm (2 inch), preferred for water - PUR version: &ge 100 mm (4 inch), preferred for fuels, heating oils, oily fluids - CSM/CM version: &ge 100 mm (4 inch), preferred for many acids and lyes mounting: - The float switch is mounted either from sidewards through a cable gland &ge G1A into the vessel or - by means of a counter weight or rods (e. g. float switch combination) from the top. The pivot of the cable should always be horizontal. | |
| Process conditions | ||
| Process pressure (static pressure) | sleeve design: &le 3 bar at 20 °C (68 °F) ball design: &le 2 bar at 20 °C (68 °F) | |
| Density | sleeve design: &ge 0.8 g/cm3 ball design: &ge 0.6 g/cm3 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Altitude | &le 2000 m above MSL | |
| Mechanical specifications | ||
| Degree of protection | IP68 | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | TÜV 99 ATEX 1407 | |
| Group, category, type of protection | II 2G Ex ia IIB T5 | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 | |
| Mechanical construction | ||
| Material | float: PP (Polypropylene) cable: - PVC version: PVC cable, highly flexible (2 x 0.75 mm2) - PUR version: PUR cable, highly flexible (2 x 0.50 mm2) - CSM/CM version: CSM/CM cable (chlorinated polyethylene, (2 x 0.75 mm2)) | |
Товаров: 0
На сумму: 0